This will disable the Auto Park feature for the duration of the Key cycle and/or until the Customer presses “OK” on the F5 to cancel. On the selection of “Auto Park Disable” displays “Auto Park DISABLED. This action will lock the front and rear brakes and hold them locked until the user presses OK on the device or unplugs the Flashcal. On selection of “Lock and Hold” prompts the driver “To Engage, Firmly Pump Brakes until Hard” for 4 seconds then switches screens to “Rock Lock ACTIVE. This action will lock the front brakes and hold them locked until the user presses OK on the device or unplugs the Flashcal.

On selection of “Lock and Hold” prompts the driver “To Engage, Firmly Pump Brakes until Hard” for 4 seconds then switches screens to “Line Lock ACTIVE. When the user selects “Unlock” the Flashcal will force the sway bar to disconnect, regardless of drive mode (2H,4H,4L) and hold it in a disconnected state unless the vehicle exceeds 25 MPH or until the user selects Exit or disconnects the Flashcal.įactory settings allow the driver to disconnect in 4H and 4L drive modes only and will lock it back if the driver exceeds 17 MPH, shifts into Park, and/or switches to 2H drive mode. Once the user selects an RPM value the Flashcal sets and maintains that engine RPM value until the user Increments of +/- 100 RPM per button press. Non-permanent settings that return to stock when the tuner is unplugged and/or the user exits the options menu and/or a key cycle occurs. Jeep JL Flashcal & JT Gladiator v2.0 – Feature Update

Superchips flashpaq troubleshooting